ProGrip Brake System Jeep Wrangler JK Stock Bolt Pattern Dynatrac

This Dynatrac ProGrip Brake System is designed for stock wheel bolt pattern Jeep Wrangler JKs. The kit provides balanced braking, reduced nose dive, and dramatically improved vehicle control compared to front brake upgrade kits.

This Dynatrac ProGrip Brake System is designed for stock wheel bolt pattern Jeep Wrangler JKs. The system comes with larger rotors for the front and rear, providing improved braking by moving the factory calipers farther from the axle centerline.

The increased rear braking power provides balanced braking, reducing nose dive, and dramatically improving the control of the vehicle in moderate and hard braking conditions compared to upgrades that only address the front brakes. Fully instrumented testing showed lower brake pedal pressure and a reduction in stopping distances of up to 30 percent compared to stock brakes on a Jeep JK outfitted with a four-inch lift and 37-inch-tall tires.

Measured g-force during moderate braking (1,000-PSI brake fluid pressure) increased from 0.48 g with stock brakes to 0.63 g with the Dynatrac ProGrip system. Another key advantage is that installation of the system does not require opening the brake hydraulics, thus avoiding the chore of bleeding the brakes after installation.

Features and Benefits:

• 13.50-inch front rotors with unique pillar-vented cooling design
• 14.25-inch rear rotors with integral parking brake surface
• Direct bolt-on for stock bolt pattern 2007-2018 JEEP Wranglers
• Stronger caliper brackets designed using Cad/Fea and advanced engineering tools
• Unique front and rear brake pads for optimum friction performance

Details:

• Brake Hoses Included: No
• Disc Brake Caliper (Rear) Mounting Bracket Included: Yes
• Disc Brake Calipers (Front) Included: No
• Disc Brake Calipers (Rear) Included: No
• Disc Brake Rotor (Front) Construction: Vented
• Disc Brake Rotor (Front) Surface Type: Smooth
• Disc Brake Rotor (Rear) Construction: Solid
• Grade Type: Performance
• Surface Type: Smooth
• Drive: 4WD
• Series: ProGrip
• Sold As: Each

Application Notes:

• 2007-2018 Jeep Wrangler (Drive: 4WD)

The Dynatrac ProGrip Brake System fits JEEP Wranglers with 17-inch wheels (wheel spacers are required with 17-inch factory wheels), and the system will fit in nearly all aftermarket wheels without spacers. This kit does not fit Mickey Thompson Sidebiter II wheels due to the unusual inner profile of the wheel.